THOMSON ST2020 Administrator'S Manual Download Page 2 | Manualshive

Page: 2 / 52

background image

VoIP Business Phone Administrator Manual

Copyright © 2005 THOMSON

-All rights reserved

- Page 2 -

European Community Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility, EN55022 Class B for ITE
and EN55024.
This meets the essential protection requirements of the European Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic compatibility.
Thomson Telecom declares that this ST 2020 IP Phone is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
You can download the declaration of conformity on

www.speedtouchpartner.com

.

The CE logo involves the conformity of the product with the essential requirements of implemented directives

.

Northern America Federal Communications Commission (FCC) Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions in this manual, may cause interference to radio communications. This equipment has been
tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of FCC rules,
which are designed to provide reasonable protection against radio interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user,
at his own expense, will be required to take whatever measures are necessary to correct the interface.

Copyright Notice & Trademarks

© Thomson 2005. All rights reserved. Thomson Telecom reserves the right to alter material or technical
specification of its products without prior notice.

SpeedTouch and Thomson are registered trademarks. Various elements (including but not limited to trademarks,
service marks, designs, logos and copyrighted material) shown on this Administrator Guide are protected by
intellectual property or other rights.

- Page 2 - -

«
1
2
3
4
...
»

Summary of Contents for ST2020





















































Reviews:

No comments

Related manuals for ST2020

Brand: Samsung Pages: 155

Brand: UMX Pages: 12

Brand: BTECH Pages: 60

SimplePhone A50

Brand: Tesla Pages: 32

Brand: Pantech Pages: 97

BLACKVIEW BV6000

Brand: Iget Pages: 52

Brand: V7 Pages: 20

Brand: Aastra Pages: 163

Brand: ORANGE Pages: 88

Brand: Samsung Pages: 98

Brand: Samsung Pages: 8

Brand: Samsung Pages: 40

Brand: Samsung Pages: 26

Brand: Samsung Pages: 26

Brand: Samsung Pages: 26

Brand: Samsung Pages: 48

Brand: Samsung Pages: 20

Brand: Samsung Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands