THOMSON ST2020 Administrator'S Manual Download Page 23

Page: 23 / 52

VoIP Business Phone Administrator Manual

- Page 23 -

3.3

Detailed LCD Menu Settings

Config

Mode, press the

[menu]

key to configure the IP phone or press the

[phonebook]

key to configure his phonebook.

[Main Menu]

Config

Mode:

LCD Screen

Description For User Action

Menu:
Acct Phone Next

Press the corresponding soft keys to select:

•

Acct: to set the SIP account settings of the IP

phone.

•

Phone: to set the phone settings (volume, call

forward)

•

Next: to go to the next page.

•

[C]:

to return to the previous page.

Menu:
Speed User Next

Press the corresponding soft keys to select:

•

Speed: to set the Speed dial numbers.

•

User: to set the user settings and password.

•

Next: to go to the next page.

•

[C]:

to return to the previous page.

Menu:
Boot Admin Home

Press the corresponding soft keys to select:

•

Boot: to reboot the phone.

•

Admin: to set admin settings

•

Home: to return to the home page.

•

[C]:

to return to the previous page.

[Remark]: When editing address string, press [Vol+] to switch between lowercase,
uppercase and number input. Once all configurations are finalized, reboot the IP phone.

[Acct Menu]

Acct:
Authu Authp Home

Press:

•

Authu: to set the SIP authentication user.

•

Authp: to set the SIP authentication password.

•

Home: to return to the home page

•

[C]:

to return to the previous page.

SIP Proxy:
192.168.10.99

Press:
Alphanumeric keys and [*]: to edit SIP proxy IP
address.

•

[OK]:

to confirm the setting.

•

[C]:

to return to the previous page.

SIP Auth. user:
1003

Press:

Alphanumeric keys: to edit the authentication user
name.

•

[OK]:

to confirm the setting.

•

[C]:

to return to the previous page.

SIP Auth. Pwd:
0000

Press:
Alphanumeric keys: to edit the authentication password.

•

[OK]:

to confirm the setting.

•

[C]:

to return to the previous page.

Summary of Contents for ST2020




















































Search results

Summary of Contents for ST2020

Reviews:

Related manuals for ST2020

Brands by name

Popular brands

THOMSON ST2020, Administrator'S Manual

Search results

Summary of Contents for ST2020

Reviews:

Related manuals for ST2020

Brands by name

Popular brands