VoIP Business Phone Administrator Manual
Copyright ©2005 THOMSON All rights reserved.
.
For the customization in warehouse, the error information is available on LCD LED
This information can be use for troubleshooting.
TFTP Error!
Error message is shown on LCD
5.2 Enterprise auto-provisioning scenario
The enterprise APS system introduces a new feature that provides individual IP phones with
their private configuration file (phone number, display name. password, etc). These files are
named after their MAC address. For example, the file corresponding to an IP phone with the
MAC address 00:03:46:00:07:89 will have the following filename: 000346000789.txt.
[Remark]:
The
firmware version
value is not required by the DHCP server, since it is not used
in enterprise APS.
Firmware version: 2.0.4.x (e.g. 2.0.4.12, 2.0.4.13, etc)
(Must be the same as the name specified in option 133 of step 1)
APS Server
SIP Server
DHCP Server
TFTP Server
New firmware
Configuration
file
Monitor
PC
Phone C
Phone A
Phone B
Internet Gateway
INTERNET
Figure 7.2 Enterprise APS
STEP 1:
Run a DHCP server application and configure your server with the following parameters
.
-
Option 66: APS server IP address (192.168.5.120).
-
Option 132: firmware filename (e.g.:
ST2020_fw.bin
)
-
Option 133: f
irmware version: 2.0.4.x (e.g. 2.0.4.14)
-
Option 134: config filename (e.g.:
ST2020_cfg.txt
)
-
Option 135: “
phone_upgrade”
-
Other basic configurations (including IP address range, subnet mask, gateway address,
etc.).
- Page 39 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
