VoIP Business Phone Administrator Manual
Copyright © 2005 THOMSON
-All rights reserved
- Page 14
- Page 14 -
1.7
Description of Function Keys
[menu]
Press this key to enter LCD screen Menu mode. Press
[C]
key to exit.
For Web interface management, press this key first and then select
Config
option. When
the phone enters “
Config
” mode, you can then access its Web page for configuration or
upgrades.
[Soft keys]: [vol-], [vol+] and [OK]
There are 3 soft keys, each associated by vertical lines to the LCD screen. These soft keys
are used to select the corresponding item displayed. Press the key corresponding to “
Next
”
to display the next group of selectable options (if any).
[vol-] [vol+]
These 2 keys are used to adjust speakerphone or handset volume.
In configuration mode,
[vol+]
key can be used to
control the cursor, and
[vol+]
key
can be
used to toggle between uppercase/lowercase letters and numbers.
[OK]
This key also forms part of the soft key array. Press this key to enter editing mode or
confirm settings in the current page.
[C]
Press this key to cancel current setting(s) and return to the previous page without making
changes.
[Speed Dial buttons m1, m2, m3, m4 and m5]
These buttons are used as Speed dial keys to memorize phone numbers or telephony
services access numbers.
[REDIAL]
Press this key to redial the last number dialed.
[TRANSF]
Press this key to complete a transfer between two phones.
[SPKR]
Press this key to enable or disable the Speakerphone function.
[MUTE]
Press this key to mute the phone. When muted, the “Mute” LED will start blinking in
green. When mute is cancelled, the Mute LED will go off.
[HOLD]
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
