THOMSON SpeedTouch, Configuration Manual

Page: 38 / 110

Chapter 4
Bridged PPPoE
E-DOC-CTC-20051017-0167 v1.0
30
The Bridge interface
Proceed as follows to create, configure and attach/connect the bridge interface:
1
Create a new bridge interface with name BrPPPoE_br.
2
Configure the new bridge interface with as destination the ATM interface
created above.
3
Connect the bridge interface.
4
Execute
saveall
at the prompt to save this configuration.
=> eth bridge ifadd intf=BrPPPoE_br
=>
=> eth bridge ifconfig intf=BrPPPoE_br dest=BrPPPoE_atm
=>
=> eth bridge ifattach intf=BrPPPoE_br
=>
=> saveall
=>
For a complete description of all CLI commands, see the
SpeedTouch™ CLI Reference Guide.