THOMSON SpeedTouch, Configuration Manual

Page: 104 / 110

Chapter 10
Routed PPPoI
E-DOC-CTC-20051017-0167 v1.0
96
CLI Parameters:
The table below provides a description of the relevant parameters. Do not alter the
default value of the parameters not shown in this table:
Parameter Value Description
intf text string name of the PPP interface
dest text string name of the ISDN interface on which
the PPP connection is built
user text string Username needed for the PPP
connection
password text string Password needed for the PPP
connection
auth pap , chap or auto Sets the authentication protocol
restart enabled or disabled Enable or disable the retry function.
This means that the system will try
again if establishing the link fails.
retryinterval numeric If the connection fails, and restart is
enabled, the system will retry
establishing the connection after this
interval.
passive enabled or disabled Enable or disable passive mode
silent enabled or disabled Enable or disable silent mode
echo enabled or disabled Enable or disable echo
mru numeric
lPaddress IP address Local IP address of the PPP
connection. This is completed
automatically when establishing the
connection. Do not fill it in manually.
raddress IP address Remote IP address of the PPP
connection. This is completed
automatically when establishing the
connection. Do not fill it in manually.
netmask Format depends on
the format setting Netmask for the ppp connection.
This is completed automatically
when establishing the connection.
Do not fill it in manually.
format cidr , dotted or none Set the format of the netmask to cidr
or dotted, or use no netmask.
savepwd enabled or disabled Save the password. After
establishing the ppp link for the first
time, you no longer need to provide
it for subsequent connections.