THOMSON SpeedTouch, Configuration Manual, Page: 90 / 110

Chapter 10
Routed PPPoI
E-DOC-CTC-20051017-0167 v1.0
82
Scenario examples
The following two scenarios are examples of using the ISDN modem as a
responder:
Dialling in to the SpeedTouch™ for remote management purposes:
Take into account the following configuration factors:
Log in with an account that is able to change the SpeedTouch™
configuration using a WAN interface.
Add the ISDN modem to the required service you want to use.
Dialling in via the SpeedTouch™ to surf to the corporate network.
Take into account the following configuration factors:
The router configuration of the SpeedTouch™ is correct.
The correct firewall rule is added to allow traffic from the ISDN modem
towards to corporate network.
This scenario is a good alternative for when the DSL line is down or
for when the SpeedTouch™ doesn’t have a fixed IP address.