thomann Stairville DJ-X 16, User Manual

Page: 23 / 52

18 [Add/Kill] button
Use this button to specify how the Flash buttons 1…16 should affect the chaser sequence playback.
In ‘Add’ setting, the yellow LED lights up next to the button. If you now press one of the flash buttons during the
course of a chaser sequence, the chaser sequence will no longer play, but only that channel is set to maximum
brightness (100 %, DMX value 255), which is assigned to this button; the other channels are blackout (0 %, DMX value
0). So the flash function temporarily replaces the performance of the chaser sequence. But the chaser sequence itself
continues invisibly.
In ‘Kill’ setting, the LED is off. If you now press one of the flash buttons during the course of a chaser sequence, the
chaser performance will continue and, additionally, that channel is switched to maximum brightness (100 %, DMX
value 255) which is associated with the button. So the flash function is superimposing the chaser sequence.
19 [Program] / [End Step] button
Press and hold this button for more than one second to call up the ‘Program’ mode. The adjacent LED lights up then.
Now you can programme 30 variable chaser sequences (with numbers 1…30), each to include up to 99 steps. Press
this button to save your settings as a single step. The display shows the next step to be programmed.
Pressing
[Shift] and [Program] / [End Step] simultaneously in ‘Program’ mode determines the current step as the final
step of the chaser sequence.
Connections and operating elements
DJ-X 16
23