27
[Stand By]
/
[Manual]
button
Press
[Stand By / Manual]
to call up the ‘Standby’ mode or exit it again. In ‘Standby’ mode, the yellow LED next to the
button is flashing. The faders, the Latch buttons and the master level generated by the current pattern are turned off.
The Flash buttons and the
[Full On]
button remain functioning.
Press
[Shift]
and
[Stand By]
/
[Manual]
simultaneously to call up the ‘Manual’ mode. The status LED Manual lights up
in the display. The display shows the Master fader setting in a range between
‘000’
and
‘100’
.
28 Control LEDs
Channel Flash: Unit is operational.
Assign Kill: (not supported by current software version)
Assign Add: (not supported by current software version)
No Fade Time: In ‘Chase’ mode, the chaser steps follow each other directly in a row (hard break).
Step Time: In ‘Chase’ mode, the chaser steps are faded (smooth transition).
Cross Off: ‘Cross’ function is deactivated.
Cross On: ‘Cross’ function is activated.
MIDI Signal: The unit receives a MIDI signal.
Enable: ‘Blind’ function is activated.
Connections and operating elements
DMX-controller
26
Summary of Contents for Stairville DJ-X 16
