thomann Stairville DJ-X 16, User Manual

Page: 32 / 52

1.
To change to the ‘Assign’ mode, press [Assign] / [Delete Program] until the red LED next
to the button lights up.
ð
The display shows ‘AS:--’ .
2. If the yellow LED is flashing next to the [Stand By] / [Manual] button, press [Stand By] /
[Manual] .
3.
Use the faders (channels 1…8) and the Latch buttons (channels 9…16) to configure the
desired lighting effect for the scene.
4.
Simultaneously press [Assign] / [Delete Program] and that Flash button 1…16, where you
want the scene to be saved.
ð
All LEDs of the device briefly light up. The number of the assigned flash button is
indicated in the right half of the display.
Saving scenes
Operating
DMX-controller
32