thomann Stairville DJ-X 16, User Manual

Page: 39 / 52

Now you can play the individual steps of the chaser sequence in succession. Move the
MASTER fader slowly down from position 10 to 0 and then back again. The number of
the chaser sequence is indicated in the left half of the display, the right half shows the
numbers of the respectively indicated step in succession. The brightness of the LEDs A
and B corresponds to the fader position.
The ‘Blind’ function lets you completely turn off a DMX channel during playback of a chaser
sequence via keystroke. This allows you to spontaneously react to what is happening, without
having to stop the chaser sequence.
1.
During playback of a chaser sequence, press [Shift] and [STEP] / [Blind] .
ð
The control LED Enable lights up.
2. Press [Shift] and the Flash button of the desired DMX channel (1…8).
ð
The selected channel is being set to zero.
3. Press [Shift] and the Flash button of the selected DMX channel (1…8) again to release
the channel again.
4.
If you want to completely switch off the ‘Blind’ function, press [Shift] and [STEP] /
[Blind] .
ð
The Enable LED turns off.
Blinding out a DMX channel
temporarily (‘Blind’ function)
Operating
DJ-X 16
39