37
ThinkRF R5750 Real Time Signal Analyzer User Guide
Hardware Reference
This section provides physical and performance specifications, and port and
cable pinouts for the R5750.
System Specifications
The following table outlines the physical and electrical specifications for the R5750.
Description
Design Specification
Dimensions
H x W x D
(D with rubber feet)
257.3 x 193.7 x 60/66 mm (10.13 x 7.63 x 2.36/2.61
inches)
Weight (approximately)
< 2.5 kg / 5.5 lbs
Digital interface ports
Ethernet 10/100/1000, USB 2.0 console, micro-DB25
GPIO
Analog interface ports
RF IN, 10 MHz REF IN and OUT
1
, GPS
Input supply voltage
12 VDC +/- 5%
Input supply current
1.8 A maximum
Operating temperature
32 to 122°F (0 to 50°C)
1
Availability depends on the product model or application. Check your product specification.
SMA Connectors
The SMA connectors on the front and rear panels are all female jacks with 50Ω nominal
impedance.
Note
: The recommended torque setting for all SMA connectors is 45 N.cm (4lbs.in). An
example of a torque wrench that can be used for this is Huber-Suhner P/N 74 Z-0-0-79.
The following table outlines the maximum and minimum power level restrictions on the
SMA connectors.
Caution
: Injecting signal levels that exceed the specifications described in the following
table will result in permanent damage to the receiver.
