Using the ThinkRF R5750 USB Console
28
ThinkRF R5750 Real Time Signal Analyzer User Guide
If you are using a different serial terminal program, ensure the serial settings are
as follows:
•
Baud speed (bits per second): 9600
•
Data bits: 8
•
Stop bit: 1
•
Parity: none
•
Flow control: none
4.
Open the terminal session.
5.
Press the “
Enter
” key until the “
>
” cursor appears in the terminal window.
If the cursor does not appear, the USB to UART Bridge may be expecting a
typical VT100 terminal response. Press “
Ctrl + C
” and “
Enter
” until the cursor
appears. The cursor may take several seconds to appear.
6.
Enter the
*IDN?
command and press the “
Enter
” key.
The R5750 returns a message with its device identification such as “ThinkRF,
R5750....”
7.
Refer to the
R5750 Programmer's Guide
associated with the firmware release of
your R5750 for the SCPI commands to use with your R5750 via the USB console
terminal window. The firmware release version of the R5750 is returned with the
*IDN?
SCPI command.
