Using the ThinkRF R5750 Administration Console
20
ThinkRF R5750 Real Time Signal Analyzer User Guide
Configuring R5750 Time Synchronization
You can set the R5750 analyzer time manually, configure the R5750 to synchronize with
the PC’s time, or configure time synchronization with an NTP server.
Note
: The R5750 analyzer stores its time based on the Coordinated Universal Time
(UTC) and otherwise has no notion of local time-zones. Conversely, the web dialog
translates and displays the R5750 time based on the local time-zone setting of the PC.
To configure the R5750 time synchronization method:
1.
Click on the
Time Configuration
link in the left pane of the Administration
Console.
2.
In the
R5750 Device Time Configuration
window (main pane), select “
NTP
” as
the Time sync source.
3.
Enter the IP addresses for up to 3 NTP servers (you can find the NTP server list
at
https://www.ntppool.org/en/
4.
Select “
Continuous
” as the Time sync mode.
The R5750’s time is synchronized to the NTP server on a regular basis (the
interval is optimally determined automatically).
