Think 3D STORMBEE S20, User Manual

Page: 31 / 102

STORMBEE User Manual – Think 3D BVBA
Version N°1.1, last modified 30/09/2018
17
WARNING!! You should shove the battery connectors and the conversion connectors
smoothly and completely into each other and in the socket of the charger in one fluent motion. Do
not leave it halfway or fumble about to much when shoving it in the socket. The battery connectors
have a capacitor build-in to prevent sparks from occurring while connecting the batteries to the
charger (and STORMBEE). However, this capacitor can burn through if the connector is not fully
and smoothly shoved into the socket. If this happens, the battery will be permanently damaged.
Figure 4.3 Battery charging process step 3a
4. After connecting the batteries and ensuring the battery charger's both ports are in the correct
mode, simply press "Start" for a few seconds on each port and the charger will verify the
balancer connector is connected, the voltage level is consistent with a 6S LiPo battery (as
STORMBEE's are) and start charging the battery.