pg. XXXVIII
11.3 TROUBLESHOOTING CAUSE-SOLUTION
PROBLEM
CAUSE
SOLUTION
PELLET TANK IS EMPTY
FILL UP THE TANK
FOREIGN BODY SUCH AS NAIL,
NYLON, PIECE OF WOOD ON THE
FEEDER SCREW ON THE BOTTOM OF
THE TANK
REMOVE THE FOREIGN BODY
SMOKE EXHAUST NOT FREE, OR
WITH TERMINAL THAT OBSTRUCTS
THE PASSAGE OF SMOKE
CHECK THE SMOKE EXHAUST AS IT
COULD BE DIRTY OR CLOGGED
OUTLET TERMINAL CLOGGED
BECAUSE A GRILL OR TERMINAL HAS
BEEN INSERTED WHICH PREVENTS
THE FREE PASSAGE OF SMOKE
REMOVE THE TERMINAL AND REPLACE IT
WITH A MORE SUITABLE ONE.
PELLETS DO NOT DROP
INTO THE BURNER
SUDDEN GUST OF WIND WHICH HAS
MADE THE APPLIANCE GO INTO
SAFETY MODE
SWITCH THE POWER SUPPLY TO THE
APPLIANCE OFF THEN BACK ON AGAIN
SMOKE EXHAUST NOT FREE, OR
WITH TERMINAL THAT OBSTRUCTS
THE PASSAGE OF SMOKE
REMOVE THE TERMINAL AND REPLACE IT
WITH A MORE SUITABLE ONE. CHECK THE
SMOKE EXHAUST AS IT COULD BE DIRTY
OR CLOGGED
BURNER IS DIRTY
CLEAN THE BURNER ON A MORE
FREQUENT BASIS
THE APPLIANCE
ACCUMULATES PELLETS IN
THE BRAZIER WHILE
OPERATING
PELLETS WITH DEPOSIT ABOVE
PERMISSBILE LIMITS
CLEAN THE BURNER MORE OFTEN.
SET THE OPERATING PROGRAM P2
OCCURS THE FIRST TIME THE
APPLIANCE IS SWITCHED ON AS THE
SILICONE PAINT IS BEING BAKED
RUN THE APPLIANCE AT FULL POWER FOR
10 HOURS TO COMPLETE THE BAKING.
THE SMOKE EXHAUST IS NOT SEALED
CORRECTLY
MAKE SURE THAT THE GASKETS HAVE
BEEN FITTED TO THE SMOKE EXHAUST
PIPES
IF THE APPLIANCE STARTS TO
SMOKE AFTER 25 MINUTES: DIRTY
BURNER, VERY DELAYED START.
CLEAN THE BURNER
THE APPLIANCE SMOKES
IF THE APPLIANCE STARTS TO
SMOKE AFTER 25 MINUTES: DELAYED
START BECAUSE THE SCREW FEEDER
IS EMPTY
FILL UP THE TANK
DELAYED START BECAUSE THE
SCREW FEEDER IS EMPTY
FILL UP THE TANK
THE APPLIANCE SHUTS OFF
5 MINUTES AFTER THE END
OF THE START UP CYCLE
DIRTY BURNER, VERY DELAYED
START.
CLEAN THE BURNER
THE APPLIANCE ACCUMULATES
PELLETS IN THE BRAZIER
SEE POINT “PROBLEM-CAUSE-SOLUTION”
“THE APPLIANCE ACCUMULATES PELLETS
IN THE BRAZIER WHILE OPERATING“
THE GLASS IS COVERED IN
BLACK SOOT (H20)
NO CAUSE
CLEAN THE GLASS MORE OFTEN
THE APPLIANCE IS OFF BUT
THERE ARE UNBURNT
PELLETS IN THE BRAZIER
THE TANK IS EMPTY
EMPTY THE BURNER AND FILL UP THE
TANK.
Summary of Contents for ECOTHERM H20 14
Page 30: ...pg XXX K E Y F i g u r e 4 5 6 7 K E Y F i g u r e 4 5 6 7 ...
Page 31: ...pg XXXI ...
Page 32: ...pg XXXII ...