THERMOROSSI ECOTHERM H20 14, Installation, Use And Maintenance Manual

Page: 9 / 38

pg. IX
Figura 2
L
I
L
Figura 3
H
F
F
F
E
G
F
E
D
D
CP
F
T
P
M
C
- Firstly remove the protective film from the casing.
- Next mount the 2 side panels (F) by inserting the 2 holes of the
bottom fold on the pins of the base and fastening the 2 top
screws with a screwdriver.
- Fasten the front cover (C) by fitting it onto the side panels.
- Fasten the door (P) to the left side with the special hinges and
screws provided.
- Lastly fit the back cover (CP) on the front cover (C) and
fasten the hinges with the screws provided.
If you prefer the door (P) can be mounted with the handle on the
left and the hinges on the right. Simply remove the handle (M)
from the door and fix it to the holes on the left side of the door,
remove the hinges (T) and fix them to the right side of the door.
Similarly, remove the magnet from the right side of the door and
mount it on the left side of the door.
After positioning and levelling the boiler by raising or lowering the mounting feet, connecting it to the heating system and to the electrical system
(see para. 4.4, 4.5, 4.6, 4.7, 4.8 and 4.9 ),proceed to mount the casing as illustrated:
4 . 2 . 3 4 . 2 . 3 4 . 2 . 3 4 . 2 . 3 4 . 2 . 3 HO HO HO HO HOW W W W W T T T T TO MOUNT O MOUNT O MOUNT O MOUNT O MOUNT THE COMP THE COMP THE COMP THE COMP THE COMPA A A A ACT BOILER CASING CT BOILER CASING CT BOILER CASING CT BOILER CASING CT BOILER CASING