THERMOROSSI ECOTHERM H20 14, Installation, Use And Maintenance Manual

Page: 4 / 38

pg. IV
1 1
1 1 1
INTRODUCTION INTRODUCTION
INTRODUCTION INTRODUCTION INTRODUCTION
1 . 1 1 . 1 1 . 1 1 . 1 1 . 1 GENERAL GUIDELINES GENERAL GUIDELINES GENERAL GUIDELINES GENERAL GUIDELINES GENERAL GUIDELINES
This installation, use and maintenance guide is an integral and essential part of the product and must be kept by the user. Before commencing with
the installation, use and maintenance of the product, carefully read all the instructions contained in this booklet. At the time of installation of the
appliance all local regulations, including those that refer to national and European regulations, must be observed. The Manufacturer recommends
carrying out all the maintenance operations described in this manual.
This appliance must only be used as intended by the manufacturer. Any other use is considered incorrect and therefore hazardous; consequently,
the user shall be totally liable for the product if used improperly. Installation, maintenance and repairs must be carried out by personnel with
professional qualifications and in compliance with current regulatory standards and in accordance with the instructions of the manufacturer of
the appliance. Use only original spare parts.
Incorrect installation or poor maintenance could injure or damage people, animals or things; in this case the manufacturer shall be relieved of all
responsibility. Before commencing any cleaning or maintenance operation ensure that the appliance has been disconnected from the mains
power supply by means of the main system switch or some other disconnecting device installed upstream from the appliance. The product must
be installed in locations suitable for fire-fighting and furnished with all the services (power and outlets) which the appliance requires for a correct
and safe operation. Any repairs or actions carried out on any systems, components or internal parts of the appliance, or on any of the
accessories supplied with it, that are not specifically authorised by Thermorossi s.p.a, will automatically void the warranty and the manufacturer's
responsibility, pursuant to D.P.R.Use only original Thermorossi spare parts. If the appliance is sold or transferred to another user ensure that the
guide is handed over with it.
Thermorossi S.p.A. maintains the author’s rights on these service instructions.
The information in this booklet may not be reproduced or given to third parties or used for competitive purposes without the appropriate
authorization.
1.2 SAFETY GUIDELINES 1.2 SAFETY GUIDELINES 1.2 SAFETY GUIDELINES 1.2 SAFETY GUIDELINES 1.2 SAFETY GUIDELINES
PERSONAL INJURY
This safety symbol identifies important messages throughout the manual. Read the information marked by this symbol carefully as non-
observance of this message can cause serious injury to persons using the heater/boiler.
DAMAGE TO PROPERTY
This safety symbol identifies messages or instructions that are fundamental for the heater/boiler and system to function well. Failure
to observe these symbols could result in serious damage to the heater/boiler and system.
INFORMATION
This safety symbol signals instructions that are important for the good operation of the heater / boiler or heating system. The appliances
will not function correctly if the instructions are not observed correctly.
1 . 3 1 . 3 1 . 3 1 . 3 1 . 3 S T S T S T S T S TAND AND AND AND ANDARDS ARDS ARDS ARDS ARDS AND RECOMMEND AND RECOMMEND AND RECOMMEND AND RECOMMEND AND RECOMMENDA A A A ATIONS TIONS TIONS TIONS TIONS
NORMATIVE REFERENCES :national and international standards used as reference guides in the following manual for the design,
industrialization and production of the products:
- European directive 73/23/EEC-
Standard CEI 61/50 EN 303-5 : 1999
- European directive 93/68/EEC- Standard CEI EN 60204 EN 14785 : 2006
- European Directive 89/336/EEC- Standard CEI 64-8 (IEC 364)
RECOMMENDATIONS
Before using the appliance, carefully read every section of this instruction manual as knowledge of the information and the regulations
contained in it are essential for a correct use of the appliance.
The entire operation concerning the connection of the electric panel must be carried out by expert personnel; no responsibility will be
accepted for damages, even to third parties, if the instructions for installation, use and maintenance of the appliance are not followed
scrupulously. Modifications made to the appliance by the user or on his behalf, must be considered to be under his complete
responsibility. The user is responsible for all the operations required for the installation and maintenance of the appliance before and
during its use.
GENERAL WARNINGS
Caution: the appliance must be connected to a system provided with a PE conductor (in compliance with the specifications of 73/23/
EEC, 93/98/EEC, concerning low voltage equipment).
Before installing the appliance check the efficiency of the earth circuit of the power supply system.
Caution: the power supply line must have a section which is suitable for the power of the equipment. The cable section must in any
case be no less than 1.5 mm². The appliance must be powered with a voltage of 220/240 V and 50 Hz. Voltage variations which exceed
10% of the nominal value can cause poor functioning or damage the electrical device. Position the appliance so that the electric power
plug is easily accessible. Voltage variations less than 10% of the nominal value can cause lighting and use problems. Apply a current
regulator.
Ensure that a suitable differential switch is installed upstream from the equipment.
1 . 4 1 . 4 1 . 4 1 . 4 1 . 4 TRANSPOR TRANSPOR TRANSPOR TRANSPOR TRANSPORT T T T TA A A A ATION TION TION TION TION AND ST AND ST AND ST AND ST AND STORA ORA ORA ORA ORAGE GE GE GE GE
TRANSPORTATION AND HANDLING The boiler body must always be in a vertical position when handled and exclusively by means of
trolleys. Take special care to protect the electric panel, the glass, the ceramics and all the fragile parts from mechanical impact which could
damage them and their correct functioning.
STORAGE : The heater / boiler must be stored in a humid-free environment and sheltered from the weather; do not place the heater / boiler
directly on the floor. The Company denies all responsibility for damage caused to wood floors or floors made from any other material. It is
inadvisable to store the heater / boiler for long periods of time.
Caution: it is mandatory to earth the heater / boiler. If this instruction is not observed serious damage, which is not
covered by warranty, will result to the body of the heater / boiler. Have an electrician check the earthing. there
must be no electric potential (volts) between the earth of the generator and the actual earth of the plant. To prevent
electrochemical corrosion of the boiler body do not use galvanised pipes and fittings.Dedicated ground wires must
be used to ground all other materials.