pg. XXIX
•AT LEAST TWICE A YEAR clean the flue outlet. If there are any horizontal sections, inspect them and clean out any ash and soot deposits
before they block the passage of the flue gases. Also clean behind the combustion chamber shell: to access this area remove the bolts and shift
the back wall forward (see fig. 9).
A vacuum device simplifies the cleaning procedure.
Use a damp cloth or a scrunched up piece of
newspaper, dampened and rolled in the ash, to wipe
the glass until it is perfectly clean. Do not clean the
glass while the heater H2O is operating. Remember
that the heater must be completely cooled down before
the side panel can be cleaned with a soft cloth and
water.
Caution: A daily deposit of soot and combustion
residues on the glass is quite normal.
It is also normal to find partially or totally
unburned pellets in the ash pan. When the
combustion chamber door is opened it is
normal for the ash to drop to the floor.
K E Y
Figure 1 / 3
LEGENDA
Figura 1 / 3
Summary of Contents for ECOTHERM H20 14
Page 30: ...pg XXX K E Y F i g u r e 4 5 6 7 K E Y F i g u r e 4 5 6 7 ...
Page 31: ...pg XXXI ...
Page 32: ...pg XXXII ...
