Manual NOVOS und thanos EVO
Seite
34
Thermokon Sensortechnik GmbH
Parameter
Description
N3
N5
N7
Touch/
EVO
Min
Max
Default Access
Data
address
Lighting 1 - Adjustment
For dimmable luminaires there are
various possibilities to adjust the
dimming level.
Slider: The dimming value is set via a
bar with slider.
Push button operation: NOVOS
evaluates whether a long or short
button push for up or down is
actuated. After the read operation,
the value in register X must be reset
by the BMS to “
not pressed”
.
Push button operation (raw): In
register X, the command for up /
down is performed as long as the
button is pressed. After releasing the
button, the value automatically
switches back to “
not pressed
”. This
principle is only suitable for fast BUS
topologies. With high latency times, it
may happen that button commands
are not recognized due to high
latencies.
RYB-Color picker
(Only Novos Touch and thanos EVO).
RGBW values can be selected using a
colour circle and a dimmer slider. The
values are output via registers 210-
241. The dimming slider scales the
RGBW values in the range 0 - 255.
Color temperature picker:
(Only Novos Touch and thanos EVO).
A color temperature circuit can be
used to select a color temperature.
The values are output via the red
registers in the register range 210 -
241. The dimming value is output via
registers 200 - 207. The colour
temperature selection range can be
configured via registers 1547 -1562.
0 = Slider
1 = Push button operation
2 = Push button operation (raw)
3 = RYB Color picker
color dimmer slider)
4 = Color temperature picker
color dimmer slider)
●
●
0
2
0
r / w
1416
