manualshive.com logo in svg

Thermo 335904, Operator'S Manual, Page: 45 / 94

Share
Download
Thermo 335904 Operator'S Manual Download Page 45

holder and measure the rest of the standards
manually.
When the instrument has measured all the
standards, the 

Standards

screen appears,

showing the absorbance of each standard,
along with the slope, intercept and correlation
coefficient of the standard curve.

You can use this screen to:
•

Edit the standards press (

Edit Standards

)

•

Display a graph of the standard curve data
(press 

View Graph

)

•

Save the standard curve (press 

Save Test

)

•

Measure your samples (press 

Run Test

)

If you want to switch between tabular and graphical
displays, press 

View Graph/Tabular

.

Measuring unknowns

Measuring unknowns automatically (using Auto 6
or Auto 3)

1.

With the 

Standards

screen displayed, press

Run Test

. The 

Samples

screen appears.

2.

Place the blank and unknowns in the correct
cell positions.

3.

Press 

ENTER 

to measure. The instrument

automatically measures the blank first, then
measures the unknowns. When the instrument
has measured all the unknowns, the 

Standard

Curve

screen appears, showing the

absorbance and concentration of each
unknown.

Measuring unknowns manually (using Manual 6 or
Single Cell Platform)

1.

With the Standards screen displayed, press

Run Test

. The 

Samples

screen appears.

2.

Place the blank and unknowns in the correct
cell positions.

3.

Press 

Measure Blank

to measure the blank. If

your instrument is equipped with a 6-Position
Cell Holder, it automatically moves to the B
position to measure the blank. When it
completes the measurement, it returns to its
previous cell position.

4.

Press 

Measure Samples

to measure the

unknowns. If your instrument is equipped with
a 6-Position Cell Holder, press the cell position
buttons on the keypad to re-position the cell
holder and measure the rest of the unknowns
manually. When the instrument has measured
all the unknowns, the Standards screen
appears, showing the absorbance and
concentration of each unknown.

Editing a standard curve

You may edit the concentration of any standard on
a standard curve. In addition, you may change the
number of standards, select a different curve fit or
delete points from the curve.

Using “General Tests” Software

3-13

BioMate 3 Operator’s Manual

Summary of Contents for 335904































































































Reviews:

No comments