manualshive.com logo in svg

Thermo 335904, Operator'S Manual, Page: 13 / 94

Share
Download
Thermo 335904 Operator'S Manual Download Page 13

CHAPTER 1 - Setting Up the Instrument

Setting up the instrument.................................................................................................................1-1

Setting utility parameters ...........................................................................................................1-1

Selecting the language..............................................................................................................1-1

Setting the date and time ..........................................................................................................1-2

Selecting standby settings.........................................................................................................1-2

Setting baseline expiration time ................................................................................................1-2

Setting the screen contrast........................................................................................................1-2

Loading paper in the internal printer.........................................................................................1-2

Setting the utility parameters for the printer .............................................................................1-3

Selecting and positioning glassware...............................................................................................1-3

Z-dimensions ....................................................................................................................................1-4

CHAPTER 2 - Using “Biotests” Software

Overview ...........................................................................................................................................2-1

Table of parameters ...................................................................................................................2-1

Entering information & commands..................................................................................................2-1

Types of parameter entries........................................................................................................2-1

Keypad layout.............................................................................................................................2-1

SmartStart feature ............................................................................................................................2-2

Setting up a single-test SmartStart ...........................................................................................2-2

Setting up a multiple-test SmartStart ........................................................................................2-2

Nucleic acid measurements ............................................................................................................2-2

DNA (260/280 and DNA 260/230) ............................................................................................2-3

DNA with Scan (260/280) and DNA with Scan (260/230).......................................................2-4

dsDNA, ssDNA, RNA and Oligos (entered factor) Direct or UV Measurements...................2-5

Protein Measurements.....................................................................................................................2-8

Bradford (standard & micro), Lowry (standard & micro), BCA (standard & micro) and Biuret

measurements ...........................................................................................................................2-8

Direct UV (280) and Direct UV (205)........................................................................................2-9

Warburg-Christian....................................................................................................................2-10

Cell Growth .....................................................................................................................................2-11

Setting test parameters ...........................................................................................................2-11

Measuring the sample .............................................................................................................2-11

Oligo Calculator..............................................................................................................................2-12

Using the oligo calculator ........................................................................................................2-12

CHAPTER 3 - Using “General Tests” Software

General information..........................................................................................................................3-1

Editing and Loading Saved Tests .............................................................................................3-1

Specifying names for tests ........................................................................................................3-1

Specifying concentration units...................................................................................................3-1

Using the SmartStart feature.....................................................................................................3-2

Running the cell correction program.........................................................................................3-3

Taking measurements ...............................................................................................................3-5

Saving tests................................................................................................................................3-5

Basic Absorbance/%T measurements............................................................................................3-6

Setting the wavelength ..............................................................................................................3-6

Table of Contents

v

BioMate 3 Operator’s Manua

Summary of Contents for 335904































































































Reviews:

No comments