Medical Devices -Touch Controller
3
| Safety Considerations
General Safety Rules
Read the manual carefully and follow instructions
contained herein. Do not use the equipment for
purposes other than those for which it was designed.
The user assumes full responsibility in case of
operations carried out without observing the instructions
in the manual.
Safety and Accident
Prevention
This machine has been designed with suitable
measures to assure safety and the health of the user.
The following is a list of protections adopted against
mechanical risks:
-
Stability:
This machine has been designed and built
in order to guarantee its stability in all foreseen
operating conditions even if the shelves/drawers
are extracted without any risk of tipping, falling or
sudden movement.
-
Surfaces, edges, corners:
Within the limits
permitted by their functions, accessible parts of the
machine have no sharp corners, sharp edges or
rough surfaces that could cause injury.
-
Moving parts:
All components with the possibility of
movement have been designed, built and
configured to avoid risk. Some parts are also
protected by fixed guards to prevent contact or
injury.
The following is a list of measures adopted to protect
against other risks:
-
Electrical power:
This machine has been designed,
built and fit with the aim of preventing risks of
electric shock in compliance with established safety
regulations.
-
Noise:
This machine has been designed and built to
minimize risks related to the emission of acoustic
noise (always lower than 70 dB).
Contraindications
The refrigerated cabinet must not be used:
-
Exposed to weathering.
-
With adapters or extension cords.
-
In explosive atmospheres or where there is a risk of
fire.
-
Near heat sources (radiators, etc.).
List of the main safety rules:
-
Do not touch the equipment with
moist or wet hands or feet.
-
Do not insert screwdrivers or other
objects into the guards or moving
parts.
-
Do not pull the power cord to
disconnect the appliance from the
electrical mains.
-
Do not allow the machine to be used
by unauthorized users.
-
Before performing any cleaning or
maintenance, disconnect the machine
from the electrical mains by switching
it off and disconnecting the plug.
-
In case of failure and/or malfunction,
switch off the machine and do not
attempt to repair or service it on your
own. It is absolutely necessary to
contact qualified personnel.
The following is strictly forbidden:
-
Tampering with or removing the
evaporator cover enclosure that
protects the user from a risk of cutting
on the evaporator fins.
-
Removal of the data plates fixed in the
inside edge of the motor compartment
that contain technical specifications
and earth connection warnings.
-
Removal of the data plate fixed on the
evaporator unit guard and near the
electrical wiring inside the motor
compartment which warns the user to
disconnect power before working on
the unit.
The manufacturer declines any
responsibility for safety of the machine
if the above recommendations are not
observed.
