Thermo Scientific TSB140F, Operating And Maintenance Instructions Manual

Page: 28 / 62

24 | Touchscreen Controller Display Functioning Medical Devices -Touch Controller
2. Only in a specific day of the week:
Select the day of rest (e.g. Monday) and the
temperature increase value. Then, touch
to enable
the function. During the chosen day, the Night & Day
function will activate and will deactivate the day after.
3. Every day at a specific hour and during the day of
rest:
Select the Night and Day start hour, the duration,
the temperature increase value and the day of rest.
Then, touch to enable the function. In this way, the
Night & Day function will activate both every day at a
specific hour and for the set duration and for the whole
day of rest chosen.
The Night & Day function deactivates automatically.
4. Night & Day function enabled during HOLIDAYS:
Enter as day of rest HOLIDAYS and touch to enable
the function. This function will activate immediately, and
it will last till it won’t be disabled manually by touching
again the
icon
.
b) Digital Electric Lock Management
This feature allows the user to configure the lock in
accordance with its optimal use. In addition to the
standard opening by touching the relating icon, possible
configurations are nr. 2:
• Lock always open touch to activate
.
• Automatic opening and closing according to Night &
day setup: Always open during daytime use and
closed when
Night & Day function is on
touch to
activate.
It is still possible to open the door by touching the key
icon in homepage while Night & Day function is active.
Access List
Touch icon and then to access to the dedicated
sub-menu. In this page, it is possible to visualize how
many door openings, switch on/off, change limits, etc
have been done by the/each user every day (if different
users have been created, see
User Management
).
Defrosting
Equipment fitted with touchscreen controller is provided
with an advanced managing of the defrosting cycles.
The defrosting is operated only if necessary, thus
drastically reducing the number of cycles for a
cost-effective operation. For this reason, a manual
defrosting has never to be operated.
Setpoint increase
(from 0.1 to 2°C)
Day of
rest
Start
Hour
Duration
Setpoint Increase
Day
Off
If the control user password is enabled
(see
User Password Setup
), user must
enter the password 0000 to enable Night
& Day function.