Menu
48 of 73
6.3.2
Settings
Here, the behavior of the centrifuge and the operating software can be modified. To change a setting, the master
passcode must first be entered. The factory preset master passcode is 12345. Once this has been entered, all
further changes can be performed without entering the master passcode again until the menu is closed.
Access Control
1.
Protected by User PIN
If this option is active, a user must be logged in in order to be able to start the centrifuge.
If this option is not active, no user login is required in order to start the centrifuge.
Only when this option is activated can 2, 3 or 4 be selected.
Only when this option is disabled are 5 and 6 available.
2.
User may change PIN
If this option is active, users currently logged in can change their own PIN.
3.
Lock after start
Once a centrifugation run has started, the operating controls are disabled. Making a change to the set
values, say, or stopping the process, are only possible by first unlocking the controls by entering the PIN of
the logged-in user.
4.
Logout
For this option there are three possibilities:
a.
Never
The user is never automatically logged out.
b.
After Run
The user is logged out on completion of the current run.
c.
5 Minutes After Run
The user is logged out after 5 minutes of inactivity following a run.
5.
Instrument Access Level
Here, you can specify which access level is set for the centrifuge. All users can only work at the user level
set here until it is changed.
6.
User ID Logging
In these three options you can specify how the user is reported in the run log:
1.
No User Logging
No username is entered into the run log.
2.
Optional User Logging
Before centrifugation begins the user is asked whether a username should be included in the log.
3.
Mandatory User Logging
At the start of centrifugation the user must select a username that will be included in the log. No user
PIN is required.
Summary of Contents for Sorvall BIOS 16
Page 43: ...Menu 43 of 73 ...
