Thermo Scientific Centri-Vue Application
66 of 73
Input by QR-Code
1.
Generate a new remote ID in the centrifuge. Select Scan QR-Code in the “Request Remote Access“
menu.
2.
The integrated QR scanner opens.
3.
Scan the QR-code on the centrifuge with the QR scanner
4.
If the QR-code is successfully scanned, the application returns to the “Request Remote Access“ menu.
5.
The remote ID is decoded from the QR-code and shown in the ID field. The ID can be checked again,
by comparing it to the numerical code on the centrifuge.
6.
Select Verify. If successfully verified, the application returns to the “Detail view“ menu.
Error Establishing the Remote Connection
If a message "Request Error" pops up when selecting Verify, no remote connection is established to the centrifuge.
Possible error sources:
•
The remote ID was not transferred correctly from the centrifuge.
•
Another user has already built up a remote session with this remote ID.
•
The centrifuge and/or smartphone are not on the same network
QR-Code is not Recognized by the Scanner
1.
To scan the QR-code quickly and correctly, the phone must be held vertically over the QR-code.
2.
The entire QR-code should be in the bright area of the scanner.
3.
If you have problems to focus the QR-code, check if the camera of the phone works and if the camera
lens needs to be cleaned.
Closing the Remote Session
The remote session cannot be terminated manually. However, the remote session terminates automatically at the
following events:
•
A new remote ID is generated at the centrifuge.
Summary of Contents for Sorvall BIOS 16
Page 43: ...Menu 43 of 73 ...