Thermo Scientific SOLA II Flare, User Manual

Page: 28 / 164

Chapter 1
Product Overview
Thermo Scientific SOLA II Flare User Manual 1-10
Analog/Discrete Data
Communications
Table 1-2.
Analog Outputs Two 4–20 mA dc outputs, one assigned to each range
Alarm Outputs One (1) global dry contact triggered by one or more of the following:
Low detector flow alarm
Oven/pyrolyzer temperature fault
Injection valve fault
Purge failure
Detector temperature fault
Detector lamp voltage fault
One (1) out of service dry contact triggered by:
Analyzer in validation
Suspension of analyzer
Digital Data
Communications Dual channel RS-485 Modbus, TCP/IP Ethernet via Modbus, TCP/IP
encapsulated Modbus & RS-485 Modbus
Local HMI Status of all analyzer parameters (e.g. pyrolyzer furnace and analytical oven
temperatures, PMT and lamp voltages, detector flow rates, etc.) and
analytical results available on the front mounted displays, push button menu
access; hazardous area classification remains intact while operating the local
display
SOLA II Flare
Modbus Interface Complete remote control of SOLA II Flare, automatic logging of analysis
results and analytical parameters, communication to SOLA II Flare via serial
or TCP/IP encapsulated Modbus enables remote diagnostics via modem
SOLA Web Remote
Interface Complete remote control of the SOLA II Flare, ability to download 24 hours of
analysis results and analyzer parameters, communications to the SOLA II
Flare via local area network (TCP/IP) enables remote diagnostics via modem.
The Flare SOLA Web is limited to the replica of the front display on the SOLA
II Flare.
System Requirements/
Dimensions/Area
Classifications
Table 1-3.
Ambient Temperature 54 to 104 def. F (12-40 deg. C)
Ingress Protection IP-51/dustproof and dripping water
Input Voltage 110VAC, optional 220VAC to 110VAC Step Down Transformer
Power 20 amp circuit recommended; 17 amp maximum during warm-up
cycle; 7-8 amps once operation temperature achieved
Dimensions
Zone 1 Div. 1 Configurations 1581.15 mm (62.25 in) high x 647.70 mm (25.50 in) wide x 476.25
mm (18.75 in) deep
Zone 2 Div. 2 Configurations 1104.39 mm (43.48 in) high x 647.70 mm (25.50 in) wide x 476.25
mm (18.75 in) deep
Available Certifications
CSA/US: Class I, Div 2, Groups B, C & D, T3
CSA/US: Class I, Div 1, Groups B, C & D, T3
ATEX: Zone 2, 3 G Ex pz IIC T3