Thermo Scientific SOLA II Flare, User Manual

Page: 108 / 164

Appendix A
Watlow EZ Zone PM6 Series
Table A–3. Pyrolyzer settings: Setup Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Heat Algorithm PID The method of heat control.
Cool Algorithm Off
TRU-TUNE+ Enable No
Autotune Aggressiveness Critical Critical damped aggressiveness of
autotuning calculations.
User Failure Action User
When user switches to manual mode,
controller sets output power to last
open-loop set point entered by user.
Input Error Failure Off When an input error switches control
to manual mode, controller sets output
to 0%.
Open Loop Detect Enable No
Ramp Action Off
Low Set Point 0°C The minimum value of the closed loop
set point range.
High Set Point 1150°C The maximum value of the closed loop
set point range.
Set Point Open Limit Low -100.0% The minimum value of the open loop
set point range.
Set Point Open Limit High 100.0% The maximum value of the open loop
set point range.
Table A–4. Pyrolyzer settings: Setup Page > Output 1
Parameter Default Comment
Display Software Display Software
Output Function Heat
Output Control Fixed Time Base
Output Time Base 0.5
Output Low Power Scale 0% The power output will never be less
than the value specified and will
represent the value at which output
scaling begins.
Output High Power Scale 15% The power output will never be greater
than the value specified and will
represent the value at which output
scaling stops.
Thermo Scientific SOLA II Flare User Manual A-4