Thermo Scientific SOLA II Flare, User Manual

Page: 16 / 164

Safety Information & Guidelines
Thermo Scientific SOLA II Flare User Manual xiv
Caution Static sensitive component. Appropriate handling precautions required
to prevent damage.
▲
Note Notes emphasize important or essential information or a statement of
company policy regarding an operating procedure, practice, condition, etc.
▲
Safety Operating
Information
This section contains general safety and operating information applicable to
analytical systems, which must be understood by all persons installing, using, or
maintaining the analyzer system. This information is designed to aid personnel
in the safe installation, operation, and service of the analyzer and sample
systems. It is not designed to replace or limit appropriate safety measures
applicable to work performed by personnel. Any additional safety and operating
measures that are required must be determined by and followed by personnel
performing work on the system.
Caution Failure to heed the following information may lead to equipment
damage or injury to personnel.
▲
Protective eyewear (glasses with side shields or goggles as appropriate) must be
worn when servicing any part of the analyzer or sample system. When servicing
the sample system, chemical resistant gloves appropriate for the materials in the
system must be worn. When servicing the hot analyzer oven, internal
components (e.g., detectors), or hot sample system components, appropriate
gloves must be worn. Heated components should be allowed to cool before
servicing if possible. Other appropriate equipment or clothing must be used as
required by the type of work performed.
Caution Ovens, internal components, and sample systems may be hot even
when power is not applied to the unit. Take appropriate precautions to prevent
injury resulting from contact with hot items.
▲
All applicable regulations and procedures must be followed for the work
performed. Before beginning any work on the system, carefully consider all the
potential hazards and ensure that appropriate measures are taken to prevent
injury to personnel and damage to equipment.