Thermo Scientific Shake 'n Stack 6244, Operating And Maintenance Manual

Page: 17 / 92

4-2 Shake ‘n Stack Thermo Scientific
Section 4
Methodology of Hybridisation
Insert Membranes in a
Bottle
1. Assemble these items:
• Shallow tray containing 2 x SSPE (SSC).
• Mesh.
• Membrane.
Roll up mesh and membrane (Figure 4-1).
2. Place 0.3-0.5 fl. oz. (10-15 ml) of SSPE (SSC) into a bottle and then
insert the roll centrally (Figure 4-2).
3. Secure cap and, holding bottle horizontally, roll to catch the trailing
edge of the mesh; continue rolling in the same direction until coil of
mesh and membrane is well positioned.
4. Pour out SSPE (SSC) and replace with pre-warmed pre-hybridisation
buffer.
5. Place the bottle in the oven so that it rotates in the oven in the same
direction, as it was unrolled in Step 3.
Figure 4-4. Bottle in Oven Rotation
Figure 4-3. Rolling Direction of Bottle
Figure 4-2. Insert Roll
Figure 4-1. Roll Mesh and Membrane