Thermo Scientific RC 3BP Plus Instruction Manual Download Page 67 | Manualshive

Page: 67 / 70

background image

Thermo Scientific

Sorvall RC 3BP Plus

B-1

B

Warranty

Thermo Fisher Scientific makes no warranty of any kind, expressed or implied, except as stated in this
warranty policy.

The Thermo Scientific Sorvall RC 3BP Plus Centrifuge is warranted (subject to the conditions
specified below and in the warranty clause of the Thermo Fisher Scientific terms and conditions of sale
in effect at the time of sale) to be free from defects in material and workmanship for a period of one (1)
year from the date of delivery. Thermo Fisher Scientific will repair or replace and return free of charge
any part which is returned to its factory within said period, transportation prepaid by user, and which
is found upon inspection to have been defective in materials or workmanship. This warranty does not
include normal wear from use, it does not apply to any instrument or part which has been altered by
anyone other than an employee of Thermo Fisher Scientific, nor to any instrument which has been
damaged through accident, negligence, failure to follow operating instructions, the use of electric
currents or circuits other than those specified on the plate affixed to the instrument, misuse or abuse.

Thermo Fisher Scientific reserves the right to change, alter, modify or improve any of its instruments
without any obligation whatever to make corresponding changes to any instrument previously sold or
shipped.

The foregoing obligations are in lieu of all other obligations and liabilities including negligence and all
warranties, of merchantability or otherwise, expressed or implied in fact or by law, and state our entire
and exclusive liability and buyer's exclusive remedy for any claim or damages in connection with the
sale or furnishing of goods or parts, their design, suitability for use, installation or operation Thermo
Fisher Scientific will in no event be liable for any special or consequential damages whatsoever, and our
liability under no circumstances will exceed the contract price for the goods for which liability is
claimed.

Terms may vary by country. Please contact your local sales office for further information.

«
...
65
66
67
68
69
...
»

Summary of Contents for RC 3BP Plus







































































Reviews:

No comments

Related manuals for RC 3BP Plus

Brand: Ecco Pages: 3

Brand: Bard Pages: 144

Brand: GALBIATI Pages: 8

Brand: IBS Scherer Pages: 64

Brand: quadient Pages: 14

Brand: Qu-Bit Electronix Pages: 31

Brand: VDO Pages: 15

Brand: VDO Pages: 20

Brand: Yamaha Pages: 29

FUSION APOLLO MS-WB675

Brand: Garmin Pages: 18

Brand: Rapid Shape Pages: 12

MultiFill 003-561-005

Brand: Hanskamp Pages: 20

Brand: KAM Pages: 5

Brand: Veit Brisay Pages: 18

Brand: Nautilus Pages: 2

Brand: HEINE Pages: 4

Brand: Harken Industrial Pages: 6

MEGA STROBE/DMX

Brand: American DJ Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands