Thermo Scientific OGS 100, Operating Instructions Manual

Page: 79 / 110

Thermo Scientific Heratherm 9-1
9
Cleaning and Disinfection
Cleaning
Cleaning Exterior Surfaces
Remove dirt residues and depositions thoroughly using a solution of lukewarm water and
commercial detergent.
Wipe the surfaces clean using a clean cloth and clear water.
Then, wipe the surfaces dry using a clean cloth.
Wipe / Spray Disinfection
The manual wipe and spray disinfection is the following process:
• predisinfection
• cleaning as appropriate for the current application.
Incompatible cleaners
Some oven components are made of plastics. Solvents may attack
plastics. Strong acids or alkaline solutions may cause
embrittlement of plastics.
Moisture-sensitive components
Do not spray cleaning agent onto the control panel and the control
box at the rear of the oven. When wiping the oven clean, always
make sure that no moisture enters into these components.
Wipe the display window down with a slightly dampened cloth,
then wipe dry with a rag made of 100% microfiber.