Thermo Scientific OGS 100, Operating Instructions Manual

Page: 51 / 110

Start-up
Table-top units
Thermo Scientific Heratherm 5-5
Installing and Uninstalling the Lateral Air Baffles (OGS Series only)
The following section describes the installation and removal of the bottom panel.
Figure 5-6 Removing the Bottom Panel
1. Losen the two screws [1] in the bottom panel, then remove the entire bottom panel by
lifting it out of its two embossings.
Figure 5-7 Bottom Panel Removed
2. Grab the two retaining springs [1] at their tabs and pull them downwards out of the
embossings, then pull off the lateral air baffle.
Risk of damage to sensor!
To prevent accidental damage, be sure to avoid collision with the sensor
when installing or uninstalling panels in the oven‘s workspace.