Thermo Scientific OGS 100, Operating Instructions Manual

Page: 75 / 110

Handling and Control
Switching the Oven Off / Powering Down
Thermo Scientific Heratherm 7-13
The multifunctional display pane will present a prompt
similar to the example shown at left, with the first digit of
the four-digit configuration code flashing.
Set the first digit of the configuration code using (or
) and confirm your setting with .
Set the remaining three digits exactly as described
above. Enter code “1234” to reset the user calibration.
By confirming your entry for the last digit with , the
new configuration is activated immediately.
The display returns to its default mode.
The Settings icon in the menu bar will go out.
Enter the four-digit code ‘1234’ to reset the user
calibration.
Enter the four-digit code ‘4321’ to reset the sensor
sample calibration.
Table 7-13 Entering the Four-digit Code