Thermo Scientific OGS 100, Operating Instructions Manual

Page: 47 / 110

Thermo Scientific Heratherm 5-1
5
Start-up
Installing the Shelf System of the table-top units
The installation of the shelf system does not require any tools. The support rails are secured in
place by spring action. Once the shelf support brackets have been inserted into the rails, the
wire-mesh shelves can be simply pushed onto their support hooks to complete the installation.
Initial installation
Heratherm OGS Series ovens have the shelving support rails integrated with the air baffles,
which are readily pre-installed when the devices are shipped from the factory.
Heratherm OMS Series ovens come with separate support rails, which need to be installed as
follows:
• Peel off the protective foil from the support rails.
• Push the retaining spring [1] into the guide on the support rail [2], making sure that the
locking nub [3] on the retaining spring safely engages with the matching hole in the
support rail.
.
Figure 5-1 Sliding the Retaining Spring into the Support Rail
The support rails of the floor stand units cannot be removed.