Thermo Scientific Multiskan Sky User Manual Download | Manualshive

Page: 21 / 42

background image

Thermo Scientific

Thermo Scientific Multiskan Sky User Manual

13

4

Instrument operations

Switch the instrument on

Before you switch the instrument on, make sure that all the cables are properly fitted according to the
installation instructions.

Switch the instrument on by pushing the power button. The instrument proceeds to perform the self
diagnostics. The instrument is ready for use when the

Home

screen opens.

Touch screen display

Multiskan Sky can be operated using the touch screen display of the instrument.

Note

The cuvette port cover must be closed during the startup self diagnostics tests.

Note

Do not switch the power off during startup, self diagnostics, or when data is transferred to a

memory device.

CAUTION

The touch screen is a sensitive component. Use, for example, your finger to operate the

instrument via the touch screen. Do not use a sharp object on the touch screen.

WARNING

If the touch screen display is broken, do not touch it with bare hands.

Note

You can operate the touch screen display while wearing disposable gloves.

«
...
19
20
21
22
23
...
»

Summary of Contents for Multiskan Sky











































Reviews:

No comments

Related manuals for Multiskan Sky

Brand: A&D Pages: 74

Brand: Lake Shore Cryotronics Pages: 97

Brand: Hanna Instruments Pages: 2

Brand: Jula Pages: 9

LISST-PORTABLE XR

Brand: Sequoia Pages: 41

Brand: TSI Instruments Pages: 4

Brand: wattwatchers Pages: 14

Brand: X-Rite Pages: 54

Brand: THORLABS Pages: 20

Brand: Hanna Instruments Pages: 2

Brand: Underground Magnetics Pages: 53

Brand: E+E Elektronik Pages: 36

Brand: JDS Uniphase Pages: 61

ALADIN SPORT PLUS

Brand: ALADIN Pages: 66

Brand: CET Pages: 2

Brand: Test Equipment Depot Pages: 9

Brand: Hach Pages: 176

Brand: Lumel Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands