4
Instrument operations
Instrument incubator
18
Thermo Scientific Multiskan Sky User Manual
Thermo Scientific
3. Tap the
Air blank
tile.
4. Tap
OK
.
The cuvette port is now set to zero absorbance level. All measured sample absorbances will be measured
in comparison to this baseline level.
Instrument incubator
The incubator temperature can be controlled from
Settings
.
To set the incubator on:
1. Go to
Settings > Instrument
.
2. In the
Incubator
settings, turn the
Enable incubator
selection ON.
3. Select the target incubation temperature either with the
+
and
-
icons, or by typing in the
temperature with the numeric keypad that opens when you tap the temperature value.
When the incubator is turned on and the temperature is set, the temperature and an arrow (for
example,
21.6
→
37.0
) shows in the application bar until the target temperature is reached.
View results
The measurement results of a run open automatically after the run.
To view other results, go to the
Runs
view and tap the run you want to view.
Export files
You can export measurement results to Thermo Fisher Cloud, the local area network, and a USB
memory device:
• from a measurement result view
• from the
Runs
view
• by defining in
Settings
that the files are exported automatically.
Tip
Tap the temperature in the application bar for a quick access to the incubator settings.
Note
Before you can export files to Thermo Fisher Connect, the instrument must be linked to the
cloud and you must be signed in. For instructions, refer to the
Thermo Scientific™ Multiskan™ Sky
Technical Manual
.
