Thermo Scientific Multidrop Combi nL User Manual Download Page 56

Page: 56 / 106

Routine Operation

Instrument options

Thermo Scientific Multidrop Combi nL User Manual

Thermo Fisher Scientific

Caution

Before deleting, always check that you have selected the item

you wish to delete.

This section describes the instrument parameters. All these parameters

are set in the

Options

menu. The values shown in the

Options

remain in the instrument memory and are instrument specific, not

protocol specific.

Note

You do not normally have to change the instrument options in

routine use.

The device information shows the name of the instrument, the internal

software version and the serial number of the instrument unit.
Go to the

Options

menu.

Press

to exit.

Instrument

options

Device information

Summary of Contents for Multidrop Combi nL











































































































Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Brands by name

Popular brands

Thermo Scientific Multidrop Combi nL, User Manual

Search results

Summary of Contents for Multidrop Combi nL

Reviews:

Brands by name

Popular brands