Thermo Scientific A44769, User Manual

Page: 102 / 132

Table 3 Variable set when changed
(continued)
Variable Type Value/Description
KitState Enum
•
NotLoaded
– Kit not loaded in instrument
•
LoadedNotValid
– Kit loaded in
instrument but the Kit ID is invalid or kit
type cannot be used with this protocol
• Valid – Kit is loaded in the instrument and
Kit ID is valid. Can now be sent to the
instrument
ProtocolChecksum String The Checksum of the loaded protocol
ProtocolName String The protocol name of the loaded protocol
ParameterName1 through
ParameterName20
String The Metadata parameter field names for the
loaded protocol
ParameterValid1 through
ParameterValid20
Enum • NotInUse – Parameter not used in
protocol
•
NotSet
– Parameter needs to be set
• OutOfRange – Parameter not in valid
range
•
Valid
– Parameter valid
ProtocolState Enum
•
NoProtocolSelected
– No protocol loaded
in the application
• ProtocolSelected – Protocol loaded in the
application
• InstrumentReady – Protocol and kit
loaded and valid. User can run recovery
operations from this state
• ReadyToStart – Protocol sent to the
instrument and ready to start. The user
can start the protocol with the start button
(if enabled), set the
ProtocolState
to
RunProtocol and run recovery operations.
• ProtocolRunning – Protocol is running
•
ProtocolPaused
– Protocol is paused
• InstrumentError – An error has been
raised on the Instrument
.
Chapter 4
OPC-UA interface
OPC-UA interface
4
102
CTS ™ Rotea ™ Counterflow Centrifugation System User Guide