Thermo King T-1000M, Installation Manual

Page: 18 / 70

16
Truck Body Opening Dimensions
Installing a New Unit onto a New Truck Box
Important Installation Requirements:
• Gasket sealing surface of 50.8 mm (2.00 in.) wide is required around the unit opening. This surface must be flat within 6.4 mm (0.25 in.) and free of all rivets or head bo
proper gasket sealing.
• The top of the evaporator to be positioned 25.4 mm (1.00 in.) below ceiling.
• Unit mounting location must allow for adequate tilt clearance (see Unit Dimensions).
NOTE: The top of the unit to be
mounted flush with the top of the
cargo box when possible. The
top of the evaporator to be
positioned 25.4 mm (1.00 in.)
below ceiling.
The dimension from the top of
the cargo box to the evaporator
cutout will vary depending on the
type of box, truck cab tilt
clearance. etc.
T-580 through T-880 series
minimum dimension = 107 mm
(4.25 in.)