![background image](http://html1.mh-extra.com/html/thermo-king/t-1000m/t-1000m_installation-manual_1104335066.webp)
64
Auxiliary Electrical Accessories
NOTE: Thermo King does not recommend adding auxiliary electrical accessories to the electrical system of T-80 Series Self Powered Truck Units
equipped with SR-3 Controllers and Tier 4 Engines. However, if auxiliary accessories are connected to the electrical system, see the following guidelines
to ensure emission compliance for the Tier 4 engines. The function and safety of the auxiliary accessory connected to the Thermo King electrical system is
the customer’s responsibility.
Electrical Connection Guidelines
•
Connect the 12 volt load to the 2 terminal (J24) on the Base
Controller.
•
Use (J8) Pin 4 to control a 12 volt relay. The relay will be energized
when the unit is on.
•
DO NOT connect ground wires for electrical accessories to the CH
terminal (J23) on the Base Controller. Use independent ground
wires connected to the chassis ground or the negative battery
terminal.
Use (J8) Pin 4 to 12 Volt Relay Connection
DO NOT Connect Ground
Wires to CH Terminal (J23)
SR-3 Base Controller
J8 Pin 4
Location
4
2 Terminal (J24)
12 Volt Load
Connection
Summary of Contents for T-1000M
