Thermo King T-1000M, Installation Manual

Page: 19 / 70

17
Truck Body Opening Dimensions
Retrofitting a New Unit onto a Older Truck Box
Important Installation Requirements:
• Gasket sealing surface of 50.8 mm (2.00 in.) wide is required around the unit
opening. This surface must be flat within 6.4 mm (0.25 in.) and free of all rivets or head bolts for proper gasket sealing.
• Evaporator to be positioned 25.4 mm (1.00 in.) below ceiling.
• Unit mounting location must allow for adequate tilt clearance (see Unit Dimensions).
NOTE:
Existing opening same as
RD-II, TS-500 and TS-600 units
and does not require
modifications.
Opening must only be enlarged
when changing from a TS-200,
TS-300, MD-100, MD-200,
MD-300, MD-II or KD-II
349.3 mm
(13.75 in.)
Enlarge Opening as shown (See