Thermo Electron SORVALL RC3BP, Operating Instructions Manual

Page: 11 / 64

Introduction & Description SORVALL ® Centrifuges
1-4
Centrifuge Specifications
Speed
Maximum Selectable Speed 6000 rpm
Maximum Relative Centrifugal Force 7277 g
Speed Control Accuracy
±
1% or 20 rpm,
whichever is greater
Time
Maximum Selectable Time 99 minutes, 59 seconds
(or HOLD for indefinite
length of time)
Maximum Selectable ACE
(Accumulated Centrifugal Effect™)
9.99 x 10 30 (
∫ω
2 dt, input
as 9.99e30)
Temperature
Temperature Selection Range –10
°
C to 40
°
C
Temperature Control Accuracy sample temperature
controlled within 2
°
C
of set temperature
*
Overtemperature Alert Maximum allowable
temperature settable to
within 2
°
C of set temp
Maximum Noise Level
≤
58 dB
**
Maximum Average Heat Output 3.2 kW
Dimensions
Width 77 cm (30.3 inch)
Depth 102 cm (40 inch)
Height, top of control console 119.5 cm (47 inch)
Length, power cord (minimum) 244 cm (96 inch)
Additional
Depth, open door to back wall 34 cm (13.4 inch)
Height, top of open door 166 cm (65.3 inch)
Height, rotor installation liftover 92.5 cm (36.5 inch)
Diameter, chamber opening 56.5 cm (22.3 inch)
Height, vent, top of backpack 86.5 cm (34 inch)
Weight (uncrated, without rotor) 303.5 kg (669 lb)
* With the sample, rotor, and chamber temperatures equal to SET temperature at the start of the run, or, during a run, after those components
have reached equilibrium. Control range is reduced if variables combine to create an extreme condition beyond the temperature control system
capacity.
** The maximum noise output using an H6000A Rotor at its top speed of 5000 rpm, measured 6 feet from the front panel at a height of 3 feet.