unpleasant odours produced by cooking.
- The non-regenerable active carbon filters must be replaced
at least every 4 months. The saturation of the active charcoal
depends on the more or less prolonged use of the appliance,
on the type of kitchen and on the frequency with which anti-
grease filter is cleaned.
regenerable active charcoal
fil
ters it is important that they
are completely dry.
alcohol or neutral liquid detergents that are non abrasive.
The lighting .system is designed for use during cooking
and not for the prolonged general lighting of the room. The
prolonged use of the lighting system significantly decreases
the average duration of the bulbs.
If the appliance is equipped with courtesy lights it is possible
to use them for general room lighting for a prolonged amount
of time.
the non compliance with the hood cleaning
warnings and with the replacement and cleaning of the filters
entails risk of fires. One therefore recommends keeping to the
suggested instructions.
If the appliance version is with LED lamps, the intervention of
a specialised technician is necessary to replace them.
below:
A
=
Light switch
A1
=
Off key
A2
=
On key
B
=
Speed control
B1
=
Off key
B2
=
FIRST SPEED key
B3
=
SECOND SPEED key
B4
=
THIRD SPEED key
C
=
Gemma warning light key.
Only use lamps of the same type and wattage installed on
the device.
below:
This hood is fitted with a
microswitch
which allows the
activation of the motor speed) through the opening of the
telescopic undercarriage. If the telescopic undercarriage is
closed the motor speeds cannot be activated. This microswitch
does not have an impact on the activation of the lights which
must be switched on through the appropriate switch (see
Fig.9A).
A
=
Light switch
A1
=
Off key
A2
=
On key
B
=
Speed control
B1
=
FIRST SPEED key
B2
=
SECOND SPEED key
B3
=
THIRD SPEED key.
Warning!
If the telescopic undercarriage is closed with
the speed set at 2, once it is re-opened, the hood will be
reactivated with the same speed in use when the hood was
closed.
below:
This hood is equipped with a
microswitch
.
If the telescopic trolley is closed with the speed set i.e. at 2 and
the light are on, once it is reopened, the hood reactivates at
the same working speed at which it was switched off.
A =
FIRST SPEED Off/On Switch
B =
SECOND SPEED Switch
C =
THIRD SPEED Switch.
D =
Light On/Off Switch
Push-button A =
On/off lights switch.
Push-button B =
On/off cooker hood switch. The appliance
switches on at speed level 1, If the cooker hood is on depress
the push-button for 2 sec. to switch off the cooker hood. If
the cooker hood is at speed level 1 it will not be necessary
to depress the push-button to switch the cooker hood off.
Decreases the motor speed.
Display C =
Indicates the motor speed level selected and
activates the timer.
Push-button D =
Switches on the cooker hood. Increases the
motor speed. Touching the key at 3rd speed, the intensive
function runs for 6’, then the appliance go back to work at
the original speed. During this function the display blinks.
Key E =
The Timer times the functions on activation for
15 minutes, after which they are switched off. The Timer is
deactivated by re-pressing
Key E
. When the Timer is activated
the decimal point must flash on the display. The Timer cannot
be activated if the intensive speed is functioning.
The “
clean air
” function is activated by pressing key
E
for 2
seconds when the appliance is switched off. This switches
the motor on for 10 minutes every hour at the first speed.
During functioning a rotary movement of the peripheral
segments must be visualised on the display. When this time
has passed the motor switches off and the fixed letter “
C
” must
be visualised on the display until the motor re-starts after 50
minutes for another 10 minutes and so on. Press any key apart
from the light keys to return to normal functioning. Press key
E
to deactivate the function.
- When display item
C
flashes, at a speed where it alternates
with the letter
F
(e.g.
1
and
F
), the anti-grease filters must be
washed.
- When display item
C
flashes, at a speed where it alternates
with the letter
A
(e.g.
1
and
A
), the active carbon filters must
be replaced or washed depending on the type of filter.
After the clean filter has been positioned correctly, the
electronic memory must be reset by pressing button
A
for
approximately
5 seconds
, until the indication
F
or
A
shown
on the display
C
stops flashing.
the key symbols are
explained below:
A =
LIGHT
B =
OFF
C =
SPEED I
D =
SPEED II
E =
SPEED III
F =
AUTOMATIC STOP TIMER - 15 minutes
If your appliance has the
INTENSIVE
speed function, from
speed THREE, press key
E
for 2 seconds and it will be activated
for 6 minutes after which it will return to the previously
- 20 -
