Themis RES-12XR3, Installation Manual

Page: 24 / 146

RES-12XR3 Installation Manual - Configuration 7 Version 1.1
xx
Themis Computer
A matrix describing RES chassis configured for front-I/O connector and front-PCI
card access in a 16”-deep chassis is given in
Table 3 . This chassis design makes it
more convenient to install cables to the system and demands no access to the rear of
the chassis except to replace a fan.
Figure 2 shows the front view of a standard rear-
I/O RES-32 chassis ( Figure 3 on page xxi shows the rear view); Figure 4 shows the
front view of a front-I/O RES-32 chassis ( Figure 5 shows the rear view).
Table 3. Front I/O 16”-Deep Chassis Manual Matrix
Mother-
board
CPU
Sockets
RES-32XR3/FIO Manual P/N RES-22XR3/FIO Manual P/N
X8DAH+-F * 2 117611-024
X8DTU-F 2 117664-024
Naming Key: X8 uvwxyz

System RES- x 2XR3S and RES- x 1XR3, where
x = 3, 2, or 1
*RES-32XR3/FIO motherboard X8DAH+-F supports both audio and video;
however, the naming key does not contain a “T” in the title.
u: D = Double CPU sockets
S = Single CPU socket
v: A = Sound chip; no graphics chip
T = Graphics chip; no sound chip
w: Not applicable
x: i = SATA only
3 = SAS 1.0
6 = SAS 2.0
y: LN4 = Extra gigabit Ethernet controller for two extra ports
z: F = IPMI
blank = No IPMI
Figure 2. Front View of a Standard Rear-I/O RES-32 Chassis (Doors Removed)