Themis RES-12XR3, Installation Manual

Page: 59 / 146

2—Installation and Operation
Installation Procedures
2-13
Themis Computer
2.1.5.1 Opening the RES-12XR3 Front Doors
To access the removable storage drives, you must first open the front doors (see Fig-
ure 2-12 , page 2-13). The knurled captive screw on the front of the RES-12XR3
allows the doors to lock without a key. To unlock the front doors, turn the screw
counterclockwise and pull both bezel doors away from the chassis.
The accessory kit shipped with your RES-12XR3 contains two barrel lock keys. This
provides you the option of unlocking/locking the storage drives.
2.1.5.2 Storage-Drive Removal
After opening the front doors, perform the following steps to remove and install a
storage drive:
Figure 2-12. Opening the RES-12XR3 Front Doors
Figure 2-13.
Unlocking the RES-12XR3 Storage Drives (Front Doors Removed)
Knurled
Screw
Drive Lock
(one per drive)
Drive Rele as e
B u tton
Drive 0
Drive 1
Drive 2
Note: Since RES-12XR3 storage drives are “hot-swappable”, it is not necessary
to turn off system power in order to remove and replace a drive (except the oper-
ating system drive). However, after a warning has been broadcast to all users, the
drive being replaced should be dismounted before being removed.
Consult your operating system manual for specific details.