Themis RES-12XR3, Installation Manual

Page: 66 / 146

RES-12XR3 Installation Manual - Configuration 7 Version 1.1
2-20
Themis Computer
2.3 Operation
2.3.1 Plugging in the AC Power Cords
Before powering on the RES-12XR3, plug in the AC power cords as follows:
1. On the rear of the RES-12XR3, plug an AC power cord (shipped with unit)
into the AC power socket on each power supply (see
Figure 2-19 ).
2.3.2 Turning the System On
1. Plug the AC power cord from each of the RES-12XR3 power supplies into a
“live” AC outlet.
2. On the front of the RES-12XR3 push the system power on/off button (see Fig-
ure 2-20 ). This will cause the system
POWER
LED to light (green) as well as
the rear power supply module LED to light (green).
Figure 2-19.
AC Power Socket and LED on the RES-12XR3 Rear
AC Power Socket
System Power LED
Locking Lever
Figure 2-20.
System Power Button and LED on the RES-12XR3 Front
System Power
On/Off Button
Power LED