Themis RES-12XR3, Installation Manual

Page: 65 / 146

2-19
Themis Computer
2—Installation and Operation
Rack Mounts
2.2 Rack Mounts
2.2.1 Mounting Brackets
The rack-mount brackets (flanges) are used to secure the chassis to the 19” rack (see
Figure 2-18 ). Handles are used to pull the RES-12XR3 from the rack when rack-
mount slides have been installed on the sides of the chassis (see following section).
2.2.2 Rack-Mount Slides (Optional)
Rack-Mount Slides can be mounted on each side of the RES-12XR3, for the purpose
of sliding the unit in and out of a rack. Mounting slides are optional and should be
ordered at the time your system is purchased.
To learn how to install rack-mount slides, refer to Appendix B, “Rack-Mount Slide
Installation”.
Figure 2-18.
Right Rack-Mount Bracket
Right Mounting
Bracket
Right Handle
Caution: Any screws used to mount a slide to a RES-12XR3 chassis must not ex-
ceed a length of 3/8” to prevent excessive penetration of the chassis.