Join-A-Jig
™
User Manual
Page 29
Creating Wood Joints
Creating edge joins
Edge joining is used to join workpieces edge-to-edge, such as when making
a table top .
Tip:
For best results join workpieces that are no wider than 150mm . This
helps prevent the finished piece from bowing.
Follow these instructions to join workpieces edge-to-edge .
Note:
You may choose to only drill pocket holes on 1 edge of each
workpiece .
Step
Action
1
Drill a pocket hole 50mm in from each end of the workpieces .
2
Drill the remaining pocket holes every 100mm to 200mm .
3
Clamp the workpieces to keep them flush.
4
Use the Square Drive to drive in the screws.
Summary of Contents for Join-A-Jig
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
