The Renovator Join-A-Jig, Instruction Manual

Page: 10 / 36

Page 8 Join-A-Jig
™
User Manual
What’s Included
Parts of the Join-A-Jig
™
This table describes the parts of the Join-A-Jig
™
.
Part Description
Clamp Handle Squeezing the Clamp Handle grips holds the
workpiece securely in place .
Quick Release Trigger Releases the workpiece .
Clamp Pad
Prevents the timber from being dented when you
tighten the Clamp Handle .
Drill Guide The hardened zinc drill guides are the “core” of
the Join-A-Jig
™
. As you drill the pocket holes the
Step Drill Bit follows these guides at a precise
angle calculated to provide optimal joint strength .
The Drill Guide can be used in the Join-A-Jig
™
or
can be removed and used for repairing existing
joints .
Drill Guide Locking
Pin
Locks the Drill Guide into place while you adjust
its height for different workpiece thicknesses .
Screw Fixing Holes (4) Used to permanently secure the Join-A-Jig
™
to
your workbench .
Tip: Remember to remove the rubber grip pads
from the underside o`f the Join-A-Jig
™
and keep
them in a safe place .
Clamping Recess Used to temporarily clamp the Join-A-Jig
™
to your
workbench .
Drill Guide Adjustment
Markings
Indicate the Drill Guide’s height setting .
Depth Collar Sets the maximum plunge depth of the drill .
Depth Setting Gauge Helps you find the correct Depth Collar setting for
varying workpiece thicknesses .
5 mm Spacer Block For repairs . Compensates for an addition 5mm
increase in workpiece thickness